VPL-A1002C-PJ12AS KINETIX; PERMANENT MAGNET ROTARY MOTOR, Motors-AC Servo | Allen Bradley

Environmental Specifications
Motor Accessories
The following accessories are available for Kinetix low-inertia servo motors.
2090-Series Single Motor Cables
Factory-manufactured single motor cables are required with Kinetix VP low-inertia motors. Single motor cables are designed to effectively isolate
the power, and feedback or brake signals, within the cable. Single motor cables are available in configurable standard-cable lengths, and provide
environmental and shield termination.
Contact your nearest Rockwell Automation sales office or refer to the Kinetix Motion Accessories Technical Data, publication KNX-TD004, for
information about available 2090-Series single motor cables.
Shaft Seal Kits
Shaft seal kits are available, as are replacement kits for field installation. A shaft seal provides a barrier that prevents moisture and particles from
entering the motor bearings. Shaft seals are made of nitrile and kits include a lubricant to reduce wear.
Shaft Seal Kit Catalog Numbers
See the Shaft Seal Kit Installation Instructions, publication 2090-IN012, for instructions on how to install a shaft seal.
Attribute Value
Temperature, operating 0…40 °C (32…104 °F) (3)
(3) To obtain this thermal rating, mount the motor on a surface with heat dissipation equivalent to the size of an aluminum heatsink as listed here.
Frame 063 mm, 203.2 x 203.2 x 6.35 mm (8 x 8 x 0.25 in.);
Frame 075 mm, 254.0 x 254.0 x 6.35 mm (10 x 10 x 0.25 in.);
Frames 100…165 mm, 304.8 x 304.8 x 12.7 mm (12 x 12 x 0.5 in.).
Temperature, storage -30…+40 °C (-22…+104 °F)
Relative humidity, storage 5…90% noncondensing
Atmosphere, storage Noncorrosive
IP rating (1) of motor with optional shaft seal (2) and use of
environmentally sealed cable connectors
(1) International Protection Code (IP66) is roughly equivalent to a NEMA 35 (dust tight, drip tight).
(2) An optional shaft seal kit is required to provide the specified IP rating for the motor. A system level rating is also dependent on the IP rating of the
cable. See Additional Resources on page 23 for shaft seal installation instructions.
IP66 – dust tight, jet spray (4)
(4) IP rating descriptions are for reference only. See the international standards for more complete rating descriptions.
IP rating of motor without a shaft seal, and
mounted in this direction:
Shaft down IP53 – dust t