VPL-A1001C-PJ14AA VPL Low Inertia Motors | Allen Bradley
Type number: VPL-A1001C-PJ14AA, Part No.: VPLA1001CPJ14AA, from manufacturer: Allen Bradley, Catagory: Kinetix VP Servo Motors Drives & Motors, VPL Low Inertia Motors
della101@163.com
| Module No. | VPL-A1001C-PJ14AA |
| Product name | 240V AC, 100mm Bolt Circle Frame Size, 1 (One) Magnet Stack, C Winding, 2300 RPM Rated Speed, 18 bit Single-turn … |
| Product description | VPL-A1001C-PJ14AA VPL Low Inertia Motors | Allen Bradley |
| Part number | VPLA1001CPJ14AA |
| Allen Bradley recommendation product | VPL-A1001C-PJ14AS Servo Motor, Low Inertia, 240V AC | Allen Bradley |
| Voltage | 230 VAC, 240 VAC, 480 VAC |
| Manufacturer | Allen Bradley |
| Country of origin | United States |
| Warranty | 1-2 year |
| Shipping Method | 1.Ship worldwide, usually 5-7 days. 2. We use DHL, FedEx, UPS,TNT |
| Remark | If you need a specific firmware or series relating to VPL-A1001C-PJ14AA, please call or email us, we probably have it in our large inventory. |
VPL-A1001C-PJ14AA VPL Low Inertia Motors | Allen Bradley
Catalog Number Explanation
VP L-X XXx X X-x x 1xA x
Factory Options
A=Standard
S=Shaft seal
Mounting Flange
A=IEC metric,free mounting holes (type FF)
Brake
2=No Brake
4=24V DC Brake
Connector
1=Single Speedlec DIN connector,right angle,325°rotatable
Shaft Key
J=Shaft key
K=Smooth shaf
Feedback
C=18-bit absolute single-turn digital encoder (Hiperface DSL protocol)
P=18-bit absolute multi-turm(4096 revolutions)digital encoder (Hiperface DSL protocol)
Q=23-bit absolute multi-turn digital encoder (Hiperface DSL protocol)SIL2/PLd rated,12-bit secondary safety channel1) W=18-bit absolute multi-tum digital encoder(Hiperface DSLprotocol)SIL2/PLdrated,9-bitsecondary afety chanmel2)
Rated Speed (3)
A=1500rpm D=3000 rpm M=6000rpm
B=2000rpm F=3500rpm I=6750rpm
C=2500rpm F=4500rpm U=8000rpm
Magnet Stack length(1,2,3,4,6stacks)(4)
Frame Size-Bolt Cirde Diameter (BCD)
063=63mm 115=115mm
075=75mm 130=130mm
100=100mm 165=165 mm
Voltage Class
A=200V
B=400V
Series Type
L=Low lnertia
Series
VP=Permanent magnet rotary servo motors optimized to the atings of Kinetix 5500 and Kinetix 5700 servo drives.
(1)This encoder option is available with only VPL-A/B100xx,VPL-A/B115c,VPL-A/B130cx,and VPL-B165cx motorframe sizes.
(2)This encoder option is available with only VPL-B063xx and VPL-B075a motor frame sizes.
(3)Rated speed hierarchy is only for comparative purposes.Use Motion Analzer software to size and select motors for your application,and/or the torque/speed curves in the Kinetix 5500 Drive System Design Guide,publiation KNX-RM009 and the Kinetix 5700 Drive System Design Guide,publiation KNX RM010.
(4)Refer to Motor Dimensions.1063 mm and075 mm frame sizes on page 7and Motor Dimensions (100…165 mm frame sizes on page 8 for dimensional changes (L,LB,LD,and LE)that result from the number of magnetstadks.
Before You lnstall the Motor
Perform these inspection steps and review the guidelines for shaf seals,couplings and pulleys,and electrical noise prevention.
1.Remove the motor carefully from its shipping container.
2.Inspect the motor for any damage.
3.Examine the motor frame,front output shaft,and mounting pilot for any defects.
4.Notify the carrier of shipping damage immediately.
